IIJIMA MFG.CO.,LTD-MJ1040E.S

≫ HOME

≫ SITE MAP

IIJIMA MFG, CO., LTD.

;} BODY,TH,TD { font-size: 11pt;} -->


\| Home｜Corporate｜Contact Us｜
	｜　Copyright c IIJIMA MFG.CO.,LTD. ALL RIGHTS RESERVED.

IIJIMA's New machine VJ-1060E.S

≫Brochure Downroad

Automatic Hot Foil Stamping and Die-Cutter
VJ-1060E.S

TECHNICAL SPECIFICATIONS

SPECIFICATIONS

Maximum sheet size	・・・　760×1060mm 　　 29.9"×41.7"
Minimum sheet size	・・・　330×400mm 　　 13.0"×15.7"
Maximum cutting area	・・・　740×1035 　　 29.1"×40.7"
Maximum stamping area	・・・　720×990mm 　　　28.3"×39.0"
Inside chase	・・・　780×1120mm 　　　30.7"×44.1"
Highest pressure	・・・ 300 tons 　　　330 UStons
minimum gripper margin	・・・　8mm/0.3"
Max speed for cutting	・・・　7500 i.p.h
Max speed for stamping	・・・　7500 i.p.h
Maximum sheet thickness	・・・　1.5mm/0.06" 　　　E.Flute
Heating bolster (with calendar timer)	・・・　50゜C～180゜C
Controlled pull rollers for foil feeding	・・・　3 pcs
Reel shafts	・・・　2 pcs
Foil brush removal unit	・・・　1 set
Max.diameter of foil reel	・・・　200 mmφ 　　　/8inφ
3 phase AC supply	・・・　200/220V 　　　50/60 Hz
Total power comsumption	・・・　60kW

Size

Maximum length of machine

Maximum width of machine

Maximum height of machine

Out of Main Motor

・・・　5833mm/19.1"

・・・　5490mm/18"

・・・　2200mm/7.2"

・・・　15kW

Weight of machine

・・・　15tons

Highly productive at 7500 sheets.per hour.(cutting)

7500 sheets per hour.(stamping)

Accurate register.

Extramely safe.

Shorter make ready time.

Excellent cutting pressure of 300 tons.

Electronic controls of superior reliability.

Superb durability.

At DRUPA 2004 IIJIMA introdeuced our new machine VJ-1060E.S The IIJIMA VJ-1060E.S is not just a super die-cutter for almost all types of material but a perfect hot foil stamping machine as well.
Set-up from cutting to hot foil stamping in less than 30 minutes.

Foil Feed System

■3 controlled pull rollers

■2 reel shafts.for foil rolls up to 200 mm diameter

■CNC device and console

■Unit frame can be drawn out to the drive side

Heating System

■8 controlled heat zone(50゜C～180゜C)

■heating upper bolster with cartridge heaters

■1 haneycomb chase

Foil Brush Removal Unit

■4 brushes carrying out waste leaf from the delivery frame　　　　　　　

Pressure Releasing Device

■Stamping pressure will be released automatically if sheet is not in cutting

Air Blast Device

■Releasing foil from sheet after stamping

Foil Break Detection System

■6 sensors equipped with on/off option